info@dvselectric.com Liushi Town, Wenzhou, Zhejiang, China Third-Party Verified Custom Manufacturer
English
Single Phase ATS Switch Dual Power Transfer Switch by Zhejiang DVS Electric Co., Ltd.
Industrial & Residential Power Continuity

Single Phase ATS Switch Sourcing Guide: Technical Engineering, Grid-to-Inverter Selection, & Market Trends

Engineered for seamless power transition between grid, solar inverters, and backup generators. Built to IEC 60947-6-1 standards by Zhejiang DVS Electric Co., Ltd.

24+
Years of Manufacturing Experience
<30 ms
Fast Mechanical Transfer Time
5,700 m²
Integrated Production Base
80+
Global Export Markets
100%
Full Functionality Tested

All performance metrics and factory standards are validated by independent third-party inspection agencies.

Engineering Insight

Mastering Single Phase ATS Switch Architecture & Selection

In modern microgrids, hybrid solar storage, and residential backup systems, a Single Phase ATS Switch serves as the critical node for power availability, circuit safety, and continuous load operation.

Global procurement managers, electrical contractors, and OEM panel builders face increasing complexity when sourcing a Single Phase ATS Switch (Single Phase Automatic Transfer Switch). As grid instability increases and decentralized renewable energy (such as residential solar PV and battery energy storage systems) accelerates, selecting the correct dual-power transfer mechanism requires a granular understanding of switching topology, arc quenching mechanisms, and system dynamics.

1. What Is a Single Phase ATS Switch and Why Is 2P Neutral Switching Crucial?

A Single Phase ATS Switch is an electro-mechanical or electronic changeover device designed to automatically switch a single-phase AC circuit (typically 220V, 230V, or 240V at 50/60Hz) between two isolated power supplies: Power Source A (Primary Grid Utility) and Power Source B (Alternative Generator, Hybrid Inverter, or UPS). When utility voltage sags below pre-set thresholds, trips, or experiences a complete outage, the internal control module senses the fault signal, triggers the interlocked mechanism, and connects the load to the alternative supply.

For single-phase installations, specifying a 2P (Two-Pole) Single Phase ATS Switch is mandatory under IEC 60364-7-712 and National Electrical Code (NEC) standards. Unlike single-pole switching that only interrupts the phase wire, a 2P transfer switch breaks both Line (L) and Neutral (N) conductors simultaneously. This dual-wire isolation prevents neutral ground loops, eliminates stray return currents into off-grid inverters, and protects maintenance personnel from dangerous neutral potential shifts during grid failures.

Technical Parameter Matrix: Standard 2P Single Phase ATS Switch

  • Rated Operational Voltage (Ue): AC 220V / 230V / 240V (50/60Hz)
  • Rated Insulation Voltage (Ui): AC 690V
  • Rated Impulse Withstand Voltage (Uimp): 8kV
  • Rated Current Options (Ith): 16A, 32A, 63A, 80A, 100A, 125A
  • Utilization Category: AC-33iB / AC-33B (Frequent load switching with electrical/motorized mechanism)
  • Transfer Speed: Mechanical transfer time <30ms; total switching time including detection <50ms
  • Enclosure & Mounting: Standard 35mm DIN-rail mount, UL94-V0 flame-retardant polycarbonate enclosure
  • Compliance Standards: IEC/EN 60947-6-1, GB/T 14048.11, CE Certified

Need custom voltage settings (110V AC) or custom packaging for your single phase ATS orders?

Send an Inquiry

2. PC Class vs. CB Class Single Phase ATS: Information Gain for Buyers

One of the most frequent technical inquiries processed by engineering buyers when searching for transfer switches is the difference between PC Class ATS and CB Class ATS. Making the wrong selection can lead to nuisance tripping, premature contact welding, or failure during peak fault conditions.

  • PC Class Single Phase ATS Switch: Utilizes a dual-complex contact system without integrated thermal-magnetic overload protection. It is built strictly for power switching and transfer capability. PC Class units offer exceptionally high short-time withstand current ratings (Icw), allowing them to withstand heavy short-circuit currents while upstream circuit breakers handle circuit protection. They feature fewer mechanical moving parts, higher reliability, and faster transfer times (<30ms).
  • CB Class Single Phase ATS Switch: Integrates two miniature circuit breakers (MCBs) connected via a mechanical interlocking motor drive. While CB Class switches provide built-in overload and short-circuit protection, they have lower short-time withstand ratings and require manual resetting if an electrical trip occurs on either supply line.

For modern hybrid solar inverter applications, Zhejiang DVS Electric Co., Ltd. recommends PC Class 2P Single Phase ATS Switches paired with dedicated external MCBs. This configuration prevents inadvertent tripping during inverter surge starting currents and provides higher reliability over extended operational cycles.

3. Grid-Priority vs. Solar Inverter Priority Switching Modes

Traditional ATS switches default exclusively to Grid-Priority (City Power as Main, Generator as Standby). However, in modern solar energy storage setups, intent shifts toward Solar/Battery Priority Mode. In this configuration, the Single Phase ATS Switch maintains the load on the Inverter output (Source B) as long as battery voltage remains sufficient. When the battery reaches its low-voltage cutoff, the ATS automatically transfers the load back to Utility Grid (Source A) until renewable storage recharges.

Buyer's Comparison Matrix

Single Phase ATS Switch Technical Specifications & Class Breakdown

Compare performance metrics across our primary 2P Single Phase ATS Switch product lines to match your load, installation, and operational needs.

Product Series ATS Class & Poles Rated Current (In) Transfer Time Primary Application Key Technical Edge
TOQ3-63 Series Single Phase ATS PC Class / 2P (Phase + Neutral) 16A, 32A, 63A < 30 ms Residential PV Inverter / Grid Backup Compact DIN-rail 35mm, dual indicator lamps, zero-arc switching contact design
TOQ3-125 Series High Current ATS PC Class / 2P (Phase + Neutral) 80A, 100A, 125A < 45 ms Commercial Light Industrial / Heavy Load Backup Silver alloy contacts (AgCdO/AgZnO), high Icw withstand capability, fire-control interface option
TOB9-63 CB Class Integrated ATS CB Class / 2P (Thermal-Magnetic) 6A to 63A (C Curve) < 50 ms Building Sub-panels & Telecom Cabinets Combined overcurrent protection + auto changeover in a single integrated enclosure
Smart WiFi Single Phase ATS PC Class / 2P + Smart Monitoring 16A to 63A < 30 ms (Auto / App Manual) Smart Homes, Microgrids & Remote Sites eWeLink/Tuya App remote control, real-time kWh metering, programmable switching logic

Detailed datasheets, CAD drawings, and test reports are available upon request. Contact our engineering team at info@dvselectric.com for custom parameters.

Product Showcase

Recommended Single Phase ATS Switch Models for Global Buyers

Select from our highest-rated DIN-rail dual power automatic transfer switches. Fully customizable with private labeling and market-specific certificates.

BEST SELLER
2P Single Phase ATS Switch 63A DIN Rail Dual Power Automatic Transfer Switch

2P 63A Single Phase ATS Switch (DIN-Rail)

Compact 2P PC-Class changeover switch designed for residential solar inverters and standby generators. Fast switching under 30ms with silver contact bridges.

Send an Inquiry
HEAVY DUTY
2P 100A 125A High Current Single Phase ATS Switch Night-Light Series

2P 100A / 125A Single Phase ATS Switch

Engineered for high-capacity single-phase main service panels. Features reinforced silver alloy contacts, mechanical interlocking, and LED status indicators.

Send an Inquiry
Single Phase DIN Rail ATS for PV Inverter and Generator Switching

PV & Inverter Special Single Phase ATS

Optimized for hybrid off-grid and grid-tied solar systems. Supports automatic inverter failover with adjustable return time delay to prevent voltage chatter.

Send an Inquiry
SMART IOT
WiFi Smart Single Phase ATS Circuit Switch with Mobile App Control

WiFi Smart Single Phase ATS Switch

Integrates wireless IoT connectivity for mobile app switching, power monitoring, and custom automated transfer logic based on energy tariffs or battery state.

Send an Inquiry
Enterprise Strength

Why Sourcing from Zhejiang DVS Electric Co., Ltd. Guarantees Quality

Located in Liushi Town, Wenzhou—China's low-voltage electrical capital—Zhejiang DVS Electric Co., Ltd. brings 24 years of specialized manufacturing experience in low-voltage circuit protection, switching gear, and photovoltaic accessories.

Our 5,700 m² modern factory houses dedicated production, testing, and packaging facilities. Every Single Phase ATS Switch undergoes 100% automated electrical calibration, insulation testing, and mechanical switching verification prior to packing.

  • Direct OEM/ODM Manufacturer: Customized branding, current ratings (16A–125A), and housing colors
  • Proven Quality Management System verified onsite by world-leading third-party inspection firms
  • Compliance with International Standards: Full CE marking and IEC 60947-6-1 test reports
  • High Production Capacity: Flexible MOQ starting from standard sample orders to full container shipments
  • Global Logistics & Export Support: Over 10 years exporting to Europe, South America, Middle East & Asia
Zhejiang DVS Electric Co., Ltd. Manufacturing Base in Wenzhou
Zhejiang DVS Electric Co., Ltd.Onsite Inspection Verified Manufacturing Base
Live Manufacturing Views

Inside Our Wenzhou Production & Testing Workshop

Examine our physical factory infrastructure, component assembly lines, quality control benches, and warehousing facilities.

Send an Inquiry
Frequently Asked Questions

Single Phase ATS Switch Sourcing FAQs for Engineers & Buyers

Expert technical answers to high-intent questions frequently asked across AI search tools, engineering forums, and purchasing portals.

What is a Single Phase ATS Switch and how does it function in solar inverter systems?

A Single Phase Automatic Transfer Switch (ATS) monitors primary AC grid supply and automatically transfers connected single-phase loads (220V/230V/240V) to an alternative power supply—such as a off-grid hybrid solar inverter or diesel generator—when utility power drops below safe thresholds. Once main grid power is restored and stabilized, the ATS automatically switches the load back to utility power, ensuring continuous uninterrupted operation for critical household or commercial equipment.

Why is 2P (2-Pole) neutral switching required for Single Phase ATS installations?

A 2P Single Phase ATS Switch disconnects both Line (Phase) and Neutral conductors simultaneously. In solar inverter or backup generator installations, failure to switch the Neutral wire can allow dangerous circulating neutral-ground currents, trigger upstream residual current devices (RCDs/GFCI), or damage sensitive inverter control boards due to potential differences between city grid neutral and isolated generator neutral.

What is the transfer speed of Zhejiang DVS Electric single phase ATS switches?

Our PC-Class TOQ3 series Single Phase ATS Switches achieve mechanical transfer times under 30 milliseconds (ms), with overall switching completed in under 50ms. This speed prevents computer resets, keeps lighting stable, and ensures seamless operation of standard residential appliances during grid outages.

How do I size the rated current (Amperage) for a Single Phase ATS Switch?

The ATS switch rated current (Ith) must equal or exceed the maximum continuous current rating of the upstream main circuit breaker or the maximum continuous output of the inverter/generator. Common residential single-phase ratings include 32A (for up to 7kW loads), 63A (up to 14kW loads), and 100A/125A (for heavy domestic or light commercial service entrances).

Can Zhejiang DVS Electric Co., Ltd. provide OEM branding and custom packaging for transfer switches?

Yes. Zhejiang DVS Electric Co., Ltd. offers comprehensive OEM/ODM manufacturing services. We can customize brand logo laser marking on front housings, print custom artwork on product boxes, modify control circuit operating voltages (e.g., 110V AC or 230V AC), and supply custom-rated terminal connections according to your target market requirements.

What certifications and test compliance do your Single Phase ATS Switches hold?

Our ATS series are designed and manufactured in accordance with IEC 60947-6-1 and EN 60947-6-1 low-voltage switchgear standards. They hold official CE certification, RoHS environmental compliance, and are subject to rigorous factory insulation, temperature rise, and short-time withstand current testing.

Partner with a Verified Single Phase ATS Switch Manufacturer

Get direct factory pricing, engineering datasheets, and custom OEM support for your transfer switch procurement needs.

info@dvselectric.com