All manufacturing data, floor area, and quality management protocols are verified by independent third-party inspection audits at Zhejiang DVS Electric Co., Ltd.
In regions suffering from grid instability, asymmetrical voltage drops, or frequent single-phase outages, single-phase electrical equipment connected to a 3-phase grid faces severe operational risks. An Automatic Phase Selector Switch (APSS)—also known as a 3-phase automatic phase selection relay—continuously monitors the health of all three input phases (L1, L2, L3) and seamlessly switches the output single-phase line to the optimal healthy phase.
The modern Automatic Phase Selector Switch manufactured by Zhejiang DVS Electric Co., Ltd. incorporates a high-speed 8-bit or 32-bit MCU (Microcontroller Unit). The MCU samples the root-mean-square (RMS) voltage of each phase in real time against pre-programmed upper limit (Umax) and lower limit (Umin) thresholds.
When the primary priority phase (e.g., L1) drops below the safe voltage limit (e.g., 180V AC) or experiences phase loss, the MCU triggers an internal interlocked relay matrix. Within 20 to 50 milliseconds, the load is transferred to secondary phase L2 or tertiary phase L3. Once L1 recovers above the reset hysteresis window, the device smoothly transfers back according to configured phase priority logic.
The MCU evaluates phase health ($V_{phase}$) using real-time True RMS algorithms. Phase selection eligibility requires:
Where $\Delta U_{hysteresis}$ is typically factory-set between 5V and 10V AC. This prevents chatter (rapid, damaging relay oscillations) when grid voltage fluctuates near the trip boundary.
Engineered for panel builders, commercial project contractors, and regional distributors. Every unit undergoing strict automated dielectric testing and functional calibration at Zhejiang DVS Electric Co., Ltd.

Designed for 35mm DIN-rail distribution boards. Integrates digital LED displays for individual phase voltage readout and adjustable over/under voltage delay timers.

High-ampere capability featuring silver alloy contacts (AgSnO2) for heavy inductive loads, central air conditioning units, and commercial refrigeration banks.

WiFi/RS485 Modbus enabled phase selector switch. Allows remote threshold adjustments, phase priority re-configuration, and real-time power analytics via app.
With the accelerated adoption of decentralized renewable energy microgrids and the increasing frequency of grid instability caused by extreme weather patterns, global B2B procurement of phase protection equipment is undergoing three key structural transformations.
Traditional static phase distribution leads to severe neutral current buildup and phase voltage unbalance. Modern buyers demand intelligent phase selector switches capable of dynamic phase rotation—distributing 1-phase loads across L1, L2, and L3 based on real-time phase voltage equilibrium.
Commercial microgrids increasingly pair solar inverters with hybrid phase switches. When solar generation drops on one phase, the Automatic Phase Selector Switch routes critical equipment to an active battery phase or backup grid line without interrupting operational uptime.
Electromechanical relays are transitioning toward hybrid solid-state switching topology. Future procurement standards focus on sub-10ms phase transfer times combined with RS485/Modbus telemetry for predictive fault diagnosis in data centers and telecom stations.
Use the matrix below to select the right specification for your power distribution panels and regional grid standards.
| Parameter | Industrial Grade (DVS-PS63) | Commercial Grade (DVS-PS100) | Smart IoT Grade (DVS-WPS) |
|---|---|---|---|
| Rated Operational Current (Ie) | 32A / 40A / 63A | 80A / 100A / 125A | 32A / 63A |
| Rated Operational Voltage (Ue) | 220V / 230V AC (Phase-to-Neutral) | 220V / 230V AC (Phase-to-Neutral) | 110V / 220V AC (Auto-fit) |
| 3-Phase Input Voltage Range | AC 80V - 300V (50/60Hz) | AC 80V - 300V (50/60Hz) | AC 80V - 300V (50/60Hz) |
| Overvoltage Trip Threshold (Umax) | 240V - 300V (Adjustable) | 240V - 300V (Adjustable) | 240V - 300V (App Configurable) |
| Undervoltage Trip Threshold (Umin) | 140V - 210V (Adjustable) | 140V - 210V (Adjustable) | 140V - 210V (App Configurable) |
| Phase Transfer Time (T_switch) | ≤ 30 ms | ≤ 40 ms | ≤ 20 ms (Solid-state hybrid) |
| Electrical Endurance | ≥ 100,000 Operations | ≥ 80,000 Operations | ≥ 150,000 Operations |
| Dielectric Strength | 2.5kV AC for 1 Minute | 2.5kV AC for 1 Minute | 3.0kV AC for 1 Minute |
| International Standards | IEC 60947-6-1, EN 60947-1, CE | IEC 60947-6-1, EN 60947-1, CE | IEC 60947-6-1, CE, RED Compliance |
Addressing technical inquiries, installation requirements, and wholesale OEM ordering parameters.
Located in Liushi Town, Wenzhou—China's low-voltage electrical capital—Zhejiang DVS Electric Co., Ltd. operates a modern 5,700 m² factory dedicated to manufacturing circuit breakers, phase selector switches, PV combiner boxes, and power controllers.
Since our establishment, Zhejiang DVS Electric Co., Ltd. has specialized in low-voltage power protection. Every Automatic Phase Selector Switch is manufactured under strict ISO9001 quality standards, utilizing automated assembly lines, high-precision contact riveters, and computer-controlled test benches.
Contact our engineering sales team today. We provide full technical datasheets, CAD drawings, and custom OEM quotes within 24 hours.
info@dvselectric.com